Hub Setup FAQ
Everything you need to know about setting up your Yosco Hub
Quick Start Guide
- Power on your hub — Plug in the power adapter and wait for the LED to start blinking
- Get it on the network — Plug an ethernet cable from the hub into your router for the simplest setup. On Wi-Fi? Join the "YOSCO-HUB" network from your phone to pick your home Wi-Fi.
- Configure WiFi — Select your home network and enter the password
- Find your hub — Head to the welcome page and we'll spot your hub on the network — no codes to type in
Troubleshooting
I'd rather not set up Wi-Fi
Easiest of all: plug an ethernet cable from the hub straight into your router. It comes online on its own — no setup network, no passwords. Then open the welcome page and we'll find it.
I don't see the "YOSCO-HUB" network
Make sure your hub is powered on and the LED is blinking. Wait 30-60 seconds after power-on for the setup network to appear. If you still don't see it, try power cycling the hub by unplugging it for 10 seconds and plugging it back in.
The setup page didn't appear automatically
After connecting to the YOSCO-HUB network, open a web browser and navigate to 192.168.4.1 manually.
WiFi password was entered correctly but connection failed
Double-check that your WiFi password is correct (passwords are case-sensitive). Make sure your hub is within range of your WiFi router. The hub only supports 2.4GHz WiFi networks, not 5GHz.
Hub connected to WiFi but still not detected
Wait 30-60 seconds after WiFi setup completes for the hub to fully connect and register. Then click "Search Again" on the welcome page. Make sure you're on the same network as the hub.
My network uses 5GHz WiFi only
The Yosco Hub requires a 2.4GHz WiFi network. Check your router settings to enable 2.4GHz, or use a WiFi extender that supports 2.4GHz. Many routers have a combined network that supports both frequencies automatically.
LED Status Indicators
Slow Blink (Blue)
Hub is in setup mode and broadcasting the YOSCO-HUB network
Fast Blink (Yellow)
Hub is connecting to your WiFi network
Solid Green
Hub is connected to WiFi and online
Slow Blink (Red)
Connection error - check WiFi password and signal strength
Still Need Help?
Our support team is here for you